Installation Guide

S_OK:The connection to the monitoring platform. (Server Connected appears
only if the inverter is connected to the monitoring platform).
Status: The inverter operation status:Off, Not Paired, Night Mode, Error,
Pairing, or Production
Switch: Indicates the position of the inverter ON/OFF/P switch: On, Off, or P
position.
CosPhi: Indicates the ratio between active and reactive power.A negative value
indicates a lagging CosPhi.
For more information, refer to the Power Control Application
Note , available on the SolarEdge website at
https://www.solaredge.com/sites/default/files/application_note_power_
control_configuration.pdf.
Limit: The inverter maximum output power
Country: The selected country and grid setting
Voltage (Vdc): The DC input voltage
Temp (°C or °F): The inverter heat sink temperature
Fan:Provides information about the fan status: OK, or Not working. For more
information, refer to External Fan Maintenance and Replacement on page 90.
Site Status
The Site status screen shows the accumulated status of all inverters connected to a
master inverter in a chain (bus) and the master inverter status.
For inverters with secondary units, the status of secondary units is displayed on the
screen. If a secondary unit is not operating, its column is grayed-out.
Three Phase Inverter with Synergy Technology Installation MAN-01-00401-1.5
60 Viewing System Status