User Manual

1110 SolarEdge StorEdge Solution www.solaredge.com
Each StorEdge application supports modifications to the basic system
configuration, providing homeowners with a StorEdge solution specific to
their energy requirements.
Additional StorEdge Conigurations
For systems larger than
10,250Wdc (the max DC
capability of the StorEdge
SE7600A-USS inverter) use a
separate SolarEdge inverter to
handle the extra PV power.
The StorEdge inverter manages
the baery and funcons as a
PV inverter.
During power outages, the
StorEdge inverter provides
power to backed-up loads, and
the second inverter remains
shut down unl the grid is back.
Large PV Systems
1
Where more capacity and
power are needed (for
example, to enable more
backed-up loads to be
powered simultaneously),
two StorEdge inverters
and two baeries may
be installed. Each baery
connects through a
separate StorEdge inverter,
and each inverter manages
the baery and the PV
connected to it.
More battery
capacity (kWh)
& power (kW)
2
1
2
3
4
5
6
Homeowner Requirement Details
Large PV Systems
Add another 1-ph inverter to handle addional
PV power from the array
More baery capacity (kWh) &
power (kW)
Add a second inverter and baery. Each of the
two baeries is connected to a separate StorEdge
inverter. Note: As many as two baeries may be
connected to each StorEdge inverter
More baery capacity (kWh)
Connect two baeries to a single StorEdge
inverter with one baery operang at a me
AC Coupling using a non-SolarEdge
PV inverter
The StorEdge inverter can also be used to control
the baery even on legacy PV systems installed
with non-SolarEdge inverters.
Backup Power without PV
Charge the baery by connecng it to the AC grid
for backup power
More baery capacity (kWh) &
power (kW) - one inverter
Connect two baeries to a single StorEdge
inverter where both baeries can operate at the
same me. Available: 2H 2016