Installation Manual

Smart Energy Management Only - System Configurations

AC Coupling using a non-SolarEdge Inverter

For sites with an already installed PV system with a non-SolarEdge inverter, the SolarEdge inverter can be AC-coupled to the

existing inverter, i.e. the StorEdge inverter used to manage the battery is connected to the AC output of the existing inverter.

NOTE

The meter is used for Smart Energy Management and does not measure the non-SolarEdge inverter production. The

production and self-consumption information in the moniotring portal does not take into account this production.

Figure 27: Smart Energy Management only - AC Coupling using a non-SolarEdge Inverter

AC Coupling without a PV System

For charge/discharge profile programming a StorEdge system may be installed without a PV system. In this case, the battery is

charged from the AC grid only.

NOTE

For maximizing self-consumption a PV system is required.

Figure 28: Smart Energy Management only - AC coupling without a PV system