Installation Manual

Smart Energy Management Only - System Configurations
30
Additional Capacity and Power
For sites where additional capacity and power are needed (for example, to enable loads to be powered for longer periods
and/or to enable more loads to be powered simultaneously), two StorEdge inverters and two batteries may be installed
4
. Each
battery connects through a separate StorEdge Inverter, and each inverter manages the battery and the PV connected to it. The
inverter connected to the meter operates as the system manager. An RS485 Expansion Kit (available from SolarEdge) is installed
in each of the inverters.
The system can be upgraded to work in backup mode.
Figure 26: Smart Energy Management only - Additional capacity and power
4
Additional capacity and power with one inverter will be supported in H2 2016 and will require new battery and inverter hardware.