Install Manual

1. Determinetheinvertermountinglocation,onawall,studframingorpole.Itisrecommendedto
mounttheinverterinalocationprotectedfromdirectsunlight.
2. Toallowproperheatdissipation,maintainthefollowingminimumclearanceareasbetweenthe
inverterandotherobjects:
l Ifinstallingasingleinverter:

o
8"(20cm)fromthetopoftheinverter.

o
Atleast4"(10cm)fromthebottomoftheSafetySwitch;ifconduitentrytotheSafetySwitchwill
befromthebottom,leavesufficientclearancefortheconduitsaswell.

o
4"(10cm)fromtherightandleftoftheinverter.Foreasyaccesstothefans,alargerclearanceis
recommended.
l Ifinstallingmultipleinverters:
Chapter 3: Installing the Inverter
-Three Phase System Installation Guide MAN-01-00527-1.1
29