User Manual

Charging Instructions
1. Verify that the green LED at the bottom of the inverter is ON indicating that the EV Charger is ON and ready to charge.
2. Hold the EV Charger plug and unwind the cable from the holder.
3. Connect the EV Charger plug to the charging socket of the vehicle and push firmly until it clicks into the socket. The
inverter will sound 1 short beep and the blue LED will turn on (the green LED turns off) to indicate a proper
connection.
The charging starts automatically, indicated by 2 short beeps and 1 long beep and the blue LED blinking.
When the charging is complete, the blue LED stops blinking and is steadily on.
4. Press the EV Charger plug latch and pull it from the EV charging socket.
5. Wind the EV Charger cable on the holder and hang the EV plug.
For all LED indications refer the EV Charging Inverter Installation Guide .
6 Charging Instructions