User Manual
8. Activate and configure the EV Charger as described in the next section.
NOTE
Keep the dust-cap closed when the charger is not in use.
EV Charger Activation and Configuration
After installing the EVCharging Single Phase Inverter, and the EV Charger Cable, the EV Charger should be activated in order to
enable charging. This chapter describes how to activate and configure the EVCharger using the SolarEdge monitoring platform
mobile application.
NOTE
Connection to the SolarEdge monitoring platform is required for first EV charging. Use ZigBee or Ethernet connection.
You can also use cellular connection, which requires a SIM card with a 50 MB data plan that should be purchased from a
cellular provider; a SolarEdge data plan supports activation only.
1.
Download the SolarEdge monitoring app for
iOS or Android and tap the icon to access the SolarEdge
monitoring platform.
2. Log in using your monitoring platform credentials.
3. Tap the car icon to access the EV Charger screens.
Figure 4: Monitoring platform mobile application
4. Tap Activate EVCharger and follow the instructions on the screen (scan the EV Charger code sticker using the device
camera, or enter it manually).
EV Charger Cable Installation and EV Charger Configuration MAN-01-00455-1.2
EV Charger Cable Installation and EV Charger Configuration 3