Installation Guide
Opening for cable size (diameter) Connection type
2.5 - 5 mm RS485
4.5 - 7 mm, with cut Ethernet (CAT5/6)
2 - 4 mm, with cut
Antenna cable for wireless
communication
Figure 25: Communication Gland
The communication board has a standard RJ45 terminal block for Ethernet connection,
a 6-pin terminal block for RS485 connection, and an 8-pin connector for power control
devices.
The SolarEdge GSMPlug-in and CDMA Plug-in can be connected to the
communication board for optional wireless connection.
Figure 26: Communication board connectors
Removing the Inverter Cover
1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to
discharge.
EV Charging Single Phase Inverter Guide MAN-01-00404-1.2
72 Removing the Inverter Cover