Installation Guide

PWR Limit: The inverter maximum output power set by one of the power
limiting options:
RRCR
Smart energy manager (Feed-in limitation)
P(f)
P(U)
Q(U)
Cos Phi: The ratio between active to reactive power
Power Prod: The power produced by the inverter
For more information, refer to the Power Control Application Note ,
available on the SolarEdge website at
http://www.solaredge.us/files/pdfs/application_note_power_control_
configuration.pdf.
EVCharging Status
When the EVcharger is activated, this screen displays the EVcharging status ,
according to the charging mode.
In Charge Now mode:
E V  C H A R G I N G
C h a r g e P o w e r :  3 . 1 k W
E n e r g y A d d e d :  1 . 7 k W h
EV <status>: Connected/ Disconnected / Charging
Status line shows one of the following: Ready to charge, Initializing, or
Charge Power: x.xkW.
Energy Added: Displayed during charging; 0 - 999 kWh added to the EV
battery
Last Charge: Displayed when not charging; 0kWh – 999 kWh added to
the EV battery
In Smart (charge by a schedule) mode :
E V  C O N N E C T E D
N e x t c h a r g e s e s s i o n :
1 1 : 0 0 p m - - > 0 7 : 0 0 a m
E n e r g y A d d e d :    0 k W h
EV Charging Single Phase Inverter Guide MAN-01-00404-1.2
68 Status Screens - Operational Mode