Installation Guide
S e r v e r : C e l l < S _ O K >
S t a t u s : < O K >
M N O : < X X X X X X > S i g : 5
< E r r o r m e s s a g e >
Server: The method of communication to the SolarEdge monitoring platform.
Should display Cell.
Status: Displays OK if the inverter established a successful physical connection
to the Cellular Plug-in.
S_OK: The last communication to the SolarEdge monitoring platform was
successful (appears if the inverter is connected to the platform).
Sig: The signal strength, received from the Cellular Plug-in. A value between 0-
5, (0 = no signal, 5 = excellent signal).
Error message per communication connection status failure
GSMStatus
If a GSM Plug-in is connected, this screen replaces the Server status screen:
S e r v e r : C e l l < S _ O K >
S t a t u s : < O K >
M N O : < x x x x x x x > S i g : 5
< E r r o r m e s s a g e >
Server: The method of communication to the SolarEdge monitoring platform.
Should display Cell.
Status: Displays OK if the inverter established a successful physical connection
to the modem.
S_OK: The last communication to the SolarEdge monitoring platform was
successful (appears if the inverter is connected to the platform). If S_OK is not
displayed, refer to
Status Screens - Operational Mode
on page 61.
MNO: The mobile network operator name
Sig: The signal strength, received from the modem. A value between 0-5, (0 =
no signal;
5 = excellent signal)
Error message:per communication connection status failure
Chapter 7: Configuring the Inverter 65
EV Charging Single Phase Inverter Guide MAN-01-00404-1.2