Installation Guide

NOTE
If an inverter is not configured to any country, it will not produce energy,
and the following message will be displayed on the LCD:
No Country Selected
A plus sign (+) near the country indicates that another menu will be displayed after
selection.
When selecting Auto , the inverter automatically detects the used grid.
When selecting an option with No Neutral or No N, connection to Neutral
line is not required. For any other option, you must connect the Neutral line.
2. Confirm your country selection in the confirmation screen: Toggle to YES and press
Enter.
Language
1. Select the Language option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to YES and
press Enter.
Communication
1.
Select the Communication option to define and configure:
The communication option used by the inverter to communicate with
the SolarEdge monitoring platform
The communication option used to communicate between multiple
SolarEdge devices or other external non-SolarEdge devices, such as
energy meters or loggers.
2. Select Server to set which communication method is used to communicate between
devices and the monitoring platform. Refer to
Setting Up Communication
on page
70 for a full description of these communication options.
NOTE
The Server menu shows only the communication options installed in the
inverter.
Chapter 7: Configuring the Inverter 55
EV Charging Single Phase Inverter Guide MAN-01-00404-1.2