Installation Guide
The Rapid Shutdown (PVRSS)is initiated by one of the following methods:
Inverter AC breaker is turned OFF, or AC to the inverter is disconnected
by another method (intentionally or as result of a fault)
Inverter ON/OFF switch is turned OFF
The Connection Unit is turned OFF
Each power optimizer also transmits module performance data over the DC power line
to the inverter.
Two types of power optimizers are available:
Module Add-on power optimizer – connected to one or more modules
Smart modules - the power optimizer is embedded into a module
EV Charging Single Phase Inverter
The EV Charging Single Phase Inverter (referred to as “inverter”throughout) efficiently
converts DC power from the modules into AC power that can be fed into the main
ACservice of the site and from there to the grid. The inverter also receives the
monitoring data from each power optimizer and transmits it to a central server (the
monitoring platform; requires Internet connection).
The EV Charging Single Phase Inverter is designed to provide reliable and economical
charging of an electric vehicle (EV). It provides Mode 3 EV charging from both the grid
and the PV system, and is designed to work with all plug-in vehicles with Type 1 and
Type 2 IEC62196 sockets.
An EV Charger cable (ordered separately)is required for EV charging:
The EV Charger Cable connects the EV plug to the inverter
The wall mounted EV holder is used for connecting the EVplug and also
provides strain relief for the cable when it is not plugged into the vehicle.
Figure 2: The EV Charger Cable (with holder)
EV Charging Single Phase Inverter Guide MAN-01-00404-1.2
14 EV Charging Single Phase Inverter