Installation Guide

l PROT:Theprotocoltypetowhichtheportisset:
o
ForaSolarEdgedevice:
RS485 protocol ZigBee protocol
S:SolarEdgeslave
M:SolarEdgemaster
P2P:ZigBeepoint-to-point
MPM:ZigBeemultipointmaster(fortheZigBeegatewayor
forloadmanagementbytheinverter)
MPS:ZigBeemultipointslave(foraZigBeeroutercard)
o
Forelectricitymeters,refertotheapplicationnote-ConnectinganElectricityMeter
toSolarEdgeDevicesathttp://www.solaredge.com/files/pdfs/solaredge-meter-
installation-guide-na.pdf.
o
SS:SunSpec-foranon-SolarEdgelogger(monitoringandcontrol)
Smart Energy Management Status
ThisscreenisdisplayedonlywhenSmartEnergyManagementisenabled.Thescreenshowsenergydetails
ofthesite:
S i t e L i m i t : 7 . 0 k W
S i t e P r o d : 1 0 . 0 k W
S i t e E x p o r t : 4 . 0 k W
S e l f - c o n s u m e : 6 . 0 k W
l Site Limit:Thelimitthatwasdefinedforthesite
l Site Prod:Thepowerproducedbythesite
l Site Export:Thepowerthatisfedintothegrid
l Self-consume:ThePVpowerconsumedbythesite
Formoreinformation,refertotheExportLimitationApplicationNote,availableonthe
SolarEdgewebsiteathttps://www.solaredge.com/sites/default/files/export_limitation_
application_note_NA.pdf.
Power Control Status
ThisscreenisdisplayedonlywhenPowerControlisenabled(availablefrom
communicationboard(CPU)firmwareversion2.7xx/3.7xxandlater).
P W R C T R L : R E M O T E
P W R L i m i t : 1 0 . 0 4 k W
C o s P h i : 0 . 9
P o w e r P r o d : 7 0 0 0 W
l PWR CTRL:Thepowercontrolstatus:
o
REMOTE-CommunicationwiththeRRCRorsmartenergymanagerisconfirmed/validated.
o
LOCAL-Thepoweriscontrolledlocally(e.g.byafixedlimit),orthisinverterlimitsthePVpower
productiontoitsrelativeportionofthefeed-inpowerlimit,asaresultofdisconnected
communicationwiththesmartenergymanager.Ifthisstatusappears,checkthecommunication
tothesmartenergymanagerorthecommunicationtothemeter.
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
50
Smart Energy Management Status