Installation Guide

Configuration Menu Options
ThissectiondescribeshowtousetheLCDmenusforconfiguringtheinverter.
Country and Grid
1.
SelecttheCountry optiontospecifythecountryorregioninwhichtheinverterisinstalledandthe
gridtowhichitisconnected.Thisparametermayarrivepre-configured.Ifso,verifythatitissetto
thepropercountryorregion.
WARNING!
Theinvertermustbeconfiguredtothepropercountry/regioninordertoensurethatitcomplieswith
thecountrygridcodeandfunctionsproperlywiththecountrygrids.
AVERTISSEMENT!
L'onduleur doit être configuré pour le pays approprié afin d'assurer un fonctionnement convenable
avec le réseau de ce pays.
Alistofcountriesisdisplayed.Ifnocountryisconfigured,thevalueis<NONE>.
NOTE
Ifaninverterisnotconfiguredtoanycountry,itwillnotproduceenergy,andthefollowingmessage
willbedisplayedontheLCD:
No Country Selected
Aplussign(+)nearthecountryindicatesthatanothermenuwillbedisplayedafterselection.
l WhenselectingAuto,theinverterautomaticallydetectstheusedgrid.
l WhenselectinganoptionwithNo NeutralorNo N,connectiontoNeutrallineisnotrequired.
Foranyotheroption,youmustconnecttheNeutralline.
2. Confirmyourcountryselectionintheconfirmationscreen:ToggletoYES andpressEnter.
Language
1. SelecttheLanguage optiontosetthelanguageinwhichtheLCDshoulddisplay.
2. Confirmyourlanguageselectionintheconfirmationscreen:ToggletoYESandpressEnter.
Communication
1.
SelecttheCommunication optiontodefineandconfigure:
l ThecommunicationoptionusedbytheinvertertocommunicatewiththeSolarEdge
monitoringplatform
l ThecommunicationoptionusedtocommunicatebetweenmultipleSolarEdgedevicesor
otherexternalnon-SolarEdgedevices,suchasenergymetersorloggers.
2. SelectServer tosetwhichcommunicationmethodisusedtocommunicatebetweendevicesandthe
monitoringplatform.RefertoSettingUpCommunicationonpage52forafulldescriptionofthese
communicationoptions.
NOTE
TheServermenushowsonlythecommunicationoptionsinstalledintheinverter.
Chapter 5: Configuring the Inverter
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
41