Installation Manual
Table Of Contents
- Disclaimers
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- Chapter 1: Overview
- Chapter 2: Installing the Power Optimizers
- Chapter 3: Installing the Inverter
- Chapter 4: Auto-transformer and Backed-up Loads Panel Installation (for Backup Only)
- Chapter 5: Electricity Meter Installation
- Chapter 6: StorEdge Inverter Connections
- Chapter 7: User Interface
- Chapter 8: Commissioning the Installation
- Chapter 9: System Configuration
- Chapter 10: Setting Up Communication to the Monitoring Portal
- Appendix A: Troubleshooting
- Appendix B: Replacing and Adding System Components
Connecting Communication to the Meter
Preparecablesandconnectthecommunicationwiresasdescribedinthefollowingtable.Fordetailed
informationrefertotheinstallationguidesuppliedwiththemeter.
Recommended cable type
(min-max AWG)
External Devices
connection
Meter connection
RS485 24 AWG (16-24 AWG),
shielded twisted pair, 600V
insulated
Ext. Devices 7-pin terminal
block: B, A, G
RS485 4-pin terminal block: B, A, G
IfyouhaveameterwithSolarEdgelabel,connectasillustratedbelow:
Figure 23: Connection to a meter (SolarEdge
IfyouhaveameterwithWattNodelabel,connectasillustratedbelow:
Figure 24: Connection to a meter (WattNode)
Chapter 6: StorEdge Inverter Connections
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
37