Energy Hub with Prism Technology Installation Guide
Table Of Contents
- Disclaimers
- Revision History
- HANDLING AND SAFETY INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Chapter 1: Overview
- Chapter 2: Installing the Power Optimizer
- Chapter 3: Installing the Inverter
- Chapter 4: Installing the Battery
- Chapter 5: Connecting the Inverter
- Chapter 6: Activating, Commissioning and Configuring the System
- Chapter 7: Setting Up Communication to the Monitoring Platform
- Appendix A: Errors and Troubleshooting
- Appendix B: Mechanical Specifications
- Appendix C: Replacing and Adding System Components
- Appendix D: Powering the LG Chem Battery Off and On
- Single Phase Energy Hub Inverter with Prism Technology - Technical Specificat...
- Support Contact Information
SE3000H-US SE3800H-US SE5000H-US SE6000H-US SE7600H-US UNITS
INPUT - DC (PV)
Maximum DC Power 6000 7600 10000 12000 15600 W
Maximum Input Current
(1)
8.5 10.5 13.5 16.5 20 Adc
Max. Input Short Circuit Current 45 Adc
Maximum Inverter Efficiency 99.2 %
CEC Weighted Efficiency 99 %
2-pole Disconnection Yes
INPUT - DC (BATTERY)
Supported Battery Types LG Chem RESU10H
Number of Batteries per Inverter 1 or 2
(2)
Maximum Batteries Capacity per Inverter 19.6
Continuous Power Per Inverter 5000 W
Peak Power 6900 W
Max input Current @240V 18 Adc
2-pole Disconnection Yes
SMART ENERGY CAPABILITIES
Consumption Metering
Built - in
(3)
(1)
A higher current source may be used; the inverter will limit its input current to the values stated.
(2)
When connecting two LG Chem batteries, each battery must have a different part number.
(3)
For consumption metering current transformers should be ordered separately: SEACT0750-200NA-20 or SEACT0750-400NA-20. 20 units per box.
SolarEdge-Single Phase Energy Hub Inverter with Prism Technology MAN-01-00671-1.3
75