Energy Hub with Prism Technology Installation Guide
Table Of Contents
- Disclaimers
- Revision History
- HANDLING AND SAFETY INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Chapter 1: Overview
- Chapter 2: Installing the Power Optimizer
- Chapter 3: Installing the Inverter
- Chapter 4: Installing the Battery
- Chapter 5: Connecting the Inverter
- Chapter 6: Activating, Commissioning and Configuring the System
- Chapter 7: Setting Up Communication to the Monitoring Platform
- Appendix A: Errors and Troubleshooting
- Appendix B: Mechanical Specifications
- Appendix C: Replacing and Adding System Components
- Appendix D: Powering the LG Chem Battery Off and On
- Single Phase Energy Hub Inverter with Prism Technology - Technical Specificat...
- Support Contact Information
Appendix D: Powering the LG Chem Battery
Off and On
The LGChem battery must be powered off and on at different stages of the inverter
installation.
LGChem batteries are available with either of the following two types of powering
mechanism design:
With the disconnect switch (requires Firmware version 3.24xx or later):
Figure 30: LG Chem battery - disconnect switch
With the auxiliary power switch:
Figure 31: LG Chem battery - auxiliary switch
To power off the battery:
1. Turn off the circuit breaker.
2. Turn off the disconnect/auxiliary power switch.
To power the battery back on:
1. Turn on the disconnect/auxiliary power switch.
2. Turn on the circuit breaker.
Appendix D: Powering the LG Chem Battery Off and On 71
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00671-1.3