Energy Hub with Prism Technology Installation Guide
Table Of Contents
- Disclaimers
- Revision History
- HANDLING AND SAFETY INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Chapter 1: Overview
- Chapter 2: Installing the Power Optimizer
- Chapter 3: Installing the Inverter
- Chapter 4: Installing the Battery
- Chapter 5: Connecting the Inverter
- Chapter 6: Activating, Commissioning and Configuring the System
- Chapter 7: Setting Up Communication to the Monitoring Platform
- Appendix A: Errors and Troubleshooting
- Appendix B: Mechanical Specifications
- Appendix C: Replacing and Adding System Components
- Appendix D: Powering the LG Chem Battery Off and On
- Single Phase Energy Hub Inverter with Prism Technology - Technical Specificat...
- Support Contact Information
Revision History
Version 1.3 (July 2020)
Added the requirement for a soft start device installation, in case of high-
consumption loads in
The storage system battery must be powered off before and
during wiring.
on page 10.
Added the requirement to check the feature is supported by FW version
Connecting Multiple Inverters through RS485
on page 43.
Version 1.2 (May 2020)
Product name changed to
Single Phase Energy Hub Inverter with Prism Technology
.
Updated
"Activating, Commissioning and Configuring the System" on page45
.
Added
Connecting Multiple Inverters through RS485
on page 43.
Added
Energy Hub Inverter Troubleshooting
on page 62.
Revision History 3
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00671-1.3