Installation Guide

Figure 23: Removing the Inverter Cover

Creating an Ethernet (LAN) Connection

ThiscommunicationoptionenablesusinganEthernetconnectiontoconnecttheinvertertothe

monitoringplatformthroughaLAN.

Figure 24: Example of Ethernet connection

Ethernetcablespecifications:

l Cabletype–ashieldedEthernetcable(Cat5/5ESTP)maybeused

l Maximumdistancebetweentheinverterandtherouter–100m/330ft.

NOTE

Ifusingacablelongerthan10m/33ftinareaswherethereisariskofinduced

voltagesurgesbylightning,itisrecommendtouseexternalsurgeprotection

devices.

Fordetailsreferto:

http://www.solaredge.us/files/pdfs/lightning_surge_

protection.pdf.

Chapter 6: Setting Up Communication

Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1