Installation Guide

Chapter 5: Configuring the Inverter
Thischapterdescribestheinterfacestouseforinverterconfiguration,andtheconfigurationprocedures.
LCD Buttons
UsethefourbuttonslocatedbeneaththeLCDpanelforcontrollingtheLCDmenus,settingtheinverter
configuration,andmovingbetweentheinverterstatusscreens.
TousetheLCDbuttonswhentheinvertercoverisremoved,touchthewhitedotsontheLCDbutton
frame.

Figure 20: LCD buttons
UsethefouruserbuttonstocontroltheLCDpanelmenus:
l Esc:Movesthecursor(>)tothebeginningofthecurrentlydisplayedparameter;goestotheprevious
menu,andcancelsavaluechangewithalongpress(untilAborted isdisplayed).
l Up (1)andDown (2):Movesthecursorfromonemenuoptiontoanother,movesamongthe
charactersofadisplayedparameter,andtogglesbetweenpossiblecharacterswhensettingavalue.
l OK/Enter (3):Selectsamenuoptionandacceptsavaluechangewithalongpress(untilAppliedis
displayed).
UsethethreerightmostbuttonsUp, Down and OK sequentiallyforenteringtheSetupmode.
TheLCDscreendisplaysstatusinformationofthesystemandvariousmenusforconfigurationoptions.
TheLCDpanelandbuttonsareusedduringthefollowingprocesses:
l Operational mode:TheLCDpanelallowscheckingforpropersystemoperation.RefertoStatus
Screens-OperationalModeonpage45foradescriptionofthisoption.Usetheupanddownbuttons
totogglethroughtheinformativedisplays.
l Setup mode:Uponinstallation,aninstallermayperformbasicconfiguration,asdescribedinInverter
Configuration–SetupModeonpage39.
l Error messages:Intheeventofaproblem,anerrormessagemaybedisplayedontheLCDpanel.
Formoreinformation,refertoErrorsandTroubleshootingonpage62andInverterConfiguration–Setup
Modeonpage39.
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
38
Chapter 5: Configuring the Inverter