Installation Guide

Meter Status
Meters
Export – RS485-2 Modbus ID #2
Status: OK
Power: 7.60 kW, Energy: 13.68MWh
Export – GPIO S0 meter
1000 pulses per kWh
Power: 7.60kW, Energy: 13.68MWh
Type and function: Displays the meter functionality (Production, Export, Import,
Export+Import)
Status: Displays OK if the meter is communicating with the inverter
<Error message>: If there is a meter error, it is displayed in this line.
Power: Depending on the meter type connected to the inverter, this line
displays the exported or imported power
Energy: The total energy read by the meter. The value displayed in this line
depends on the meter type connected to the inverter and its location:
If a bidirectional meter is connected at the consumption point, this
value is the consumed energy.
If the meter is installed at the production connection point, this value is
the energy produced by the site.
If the meter is installed at the grid connection point, this value is the
energy exported to the grid.
NOTE
This data is accumulated according to an internal real-time
clock.
Three Phase Inverter with Synergy Technology Installation MAN-01-00401-1.5
64 Viewing System Status