Installation Guide

P Position duration Function Comments
Switch moved to P for
less than 5 seconds,
then released.
Displays production
information for 5 seconds
on the SetApp screen.
Displays error type
indications (if exist) for 5
seconds.
Activates the Wi-Fi access
point for connecting to the
SolarEdge Inverter SetApp
While the
switch is in P,
all LEDs are ON
Switch moved to P for
more than 5 seconds,
then released.
Starts pairing 
WARNING!
Upon PVRSS, the internal circuitry remains up, therefore the inverter
cover must be opened only after shutting off the inverter ON/OFF
switch. This disables the DC voltage inside the Primary Unit. Wait five
minutes before opening the cover. Otherwise, there is a risk of electric
shock from energy stored in the capacitors.
 AVERTISSEMENT!

A la Coupure Rapide (PVRSS) les circuits internes restent actifs, ilest
donc impératif de n'ouvrir le couvercle qu'après avoir arrêté l'onduleur à
l'aide de l'interrupteur ON/OFF. Ceci coupe la tension DC à l'intérieur de
l'onduleur. Attendez cinq minutes avant d'ouvrir le couvercle. Sinon, il y
a risque d'électrocution du à l'énergie stockée dans les condensateurs.
LEDs
 LEDs: three LEDs indicate, by color and state (on/ off/ blinking
(1)
/ flickering
(2)
/alternating
(3)
), different system information, such as errors or performance
indications.
(1)
Blinking = Turns ON and OFF for the same duration
(2)
Flickering = Turns ON for 100 mS and turns OFF for 5 seconds
(3)
Alternating = Alternate LEDs flash
Three Phase Inverter with Synergy Technology Installation MAN-01-00401-1.5
30 Primary Unit Interface