Install Manual

RS485
RS485 is used for the connection of multiple SolarEdge devices on the same bus in a
leader-follower configuration. RS485 can also be used as an interface to external
devices, such as meters and third party data loggers.

Wireless Gateway, Wireless Repeater(s)
The Wireless Gateway collects inverter data using a dedicated Wi-Fi
connection and connects to the monitoring platform with the help of a
home router. Wireless Repeater(s) extend the Wi-Fi signal range between
the Wireless Gateway and inverter. Wireless Gateway and
WirelessRepeaters can be purchased separately from SolarEdge. For
more information, refer to https://www.solaredge.com/sites/default/files/se-wireless-
gateway-wireless-repeater-installation-guide.pdf.
Cellular
This wireless communication option enables using a cellular connection to connect one
or several devices (depending on the data plan used) to the monitoring platform.
The Cellular Plug-in is provided with a user manual, which should be
reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-cellular-plug-in-for-
inverters-with-setapp-installation-guide.pdf
ZigBee
This option enables wireless connection to one or several Smart Energy products, which
automatically divert PV energy to home appliances.
The Smart Energy ZigBee connections require a ZigBee plug-in and an external
antenna, available from SolarEdge.
The ZigBee Plug-in for Smart Energy is provided with an installation
guide, which should be reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-zigbee-plug-in-for-
setapp-installation-guide.pdf
Chapter 7: Setting Up Communication to the Monitoring Platform 55
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00671-1.2