Install Manual

5. Verify that each power optimizer is securely attached to the panel support structure.
6. Record power optimizer serial numbers and locations, as described in Reporting and
Monitoring Installation Data on page 51.
Step 2: Connecting a PV panel to a Power Optimizer
NOTE
Images are for illustration purposes only. Refer to the label on the product to
identify the plus and minus input and output connectors.
For each of the power optimizers:
Connect the Plus (+) output connector of the panel to the Plus (+) input connector
of the power optimizer.
Connect the Minus (-) output connector of the panel to the Minus (-) input
connector of the power optimizer.
Figure 6: Power optimizer connectors
Step 3: Connecting Power Optimizers in Strings
You can construct parallel strings of unequal length, that is, the number
of power optimizers in each string does not have to be the same. The
minimum and maximum string lengths are specified in the power
optimizer datasheets. Refer to the Designer for string length verification.
1. Connect the Minus (-) output connector of the string’s first power optimizer to the
Plus (+) output connector of the string’s second power optimizer.
2.
Connect the rest of the power optimizers in the string in the same manner.
Chapter 2: Installing the Power Optimizer 23
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00671-1.2