Energy Hub Inverter w/ Prism Datasheet

Single Phase Energy Hub Inverter
with Prism Technology
For North America
SE3000H-US / SE3800H-US / SE6000H-US / SE7600H-US / SE10000H-US / SE11400H-US
(1)
SE3000H-US
SE3800H-US SE6000H-US SE7600H-US SE10000H-US SE11400H-US
UNITS
INPUT - DC (BATTERY)
Supported Battery Types
SolarEdge Energy Bank, LG RESU Prime
(6)
Number of Batteries per Inverter
Up to 3 SolarEdge Energy Bank, up to 2 LG RESU Prime
Continuous Power
(7)
6000
7600
10000
W
Peak Power
(7)
6000
7600
10000
W
Max Input Current
16
20
26.5
Adc
2-pole Disconnection
Yes
SMART ENERGY CAPABILITIES
Consumption Metering
Built - in
(8)
Backup & Battery Storage
With Backup Interface (purchased separately) for service up to 200A; Up to 3 inverters
EV Charging
Direct connection to Smart EV charger
ADDITIONAL FEATURES
Supported Communication Interfaces
RS485, Ethernet, Cellular
(9)
, Wi-Fi (optional),SolarEdge Energy Net (optional)
Revenue Grade Metering, ANSI C12.20
Built - in
(8)
Integrated AC, DC and Communication Connection Unit
Yes
Inverter Commissioning
With the SetApp mobile application using built-in Wi-Fi Access Point for local connection
DC Voltage Rapid Shutdown (PV and Battery)
Yes, according to NEC 2014, NEC 2017 and NEC 2020 690.12
STANDARD COMPLIANCE
Safety
UL1741, UL1741 SA, UL1741 PCS, UL1699B, UL1998, UL9540, CSA 22.2
Grid Connection Standards
IEEE1547, Rule 21, Rule 14H
Emissions
FCC part 15 class B
INSTALLATION SPECIFICATIONS
AC Output and EV AC Output Conduit Size / AWG Range
1'' maximum / 14-4 AWG
DC Input (PV and Battery) Conduit Size / AWG Range
1'' maximum / 14-6 AWG
Dimensions with Connection Unit (H x W x D)
17.7 x 14.6 x 6.8 / 450 x 370 x 174
17.7 x 14.6 x 6.8 /
450 x 370 x 174
17.7 x 14.6 x 6.8 / 450 x 370 x 174
in / mm
17.7 x 14.6 x 6.8 /
450 x 370 x 174*
Weight with Connection Unit
26 / 11.8
26 / 11.8
41.7 / 18.9
lb / kg
41.7/ 18.9*
Noise
< 25
< 25
< 25 < 50
dBA
< 50*
Cooling
Natural Convection
Operating Temperature Range
-40 to +140 / -40 to +60
(10)
˚F / ˚C
Protection Rating
NEMA 4
(6) The part numbers SExxxxH-USxMxxxxx only support the SolarEdge Energy Bank. The part numbers SExxxxH-USxNxxxxx support both SolarEdge Energy Bank and LG RESU Prime batteries
Requires supporting inverter firmware
(7) Discharge power is limited up to the inverter rated AC power for on-grid and backup applications
(8) For consumption metering current transformers should be ordered separately: SECT-SPL-225A-T-20 or SEACT0750-400NA-20 units per box. Revenue grade metering is only for production metering
(9) Information concerning the Data Plan's terms & conditions is available in the following link:
https://www.solaredge.com/sites/default/files/se-communication-plan-terms-and-conditions-eng.pdf
(10) Full power up to at least 50°C / 122°F; for power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note-na.pdf
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc.
All other trademarks mentioned herein are trademarks of their respective owners. Date: March 14, 2022 DS-000031-NAM. Subject to change without notice.