Energy Hub with Prism Technology F.A.Q.s

SolarEdge Technologies | www.solaredge.com
Q: Does the Energy Hub inverter have an RJ45 port to hardwire
internet?
A: Yes. There is an Ethernet connection if you prefer to hardwire.
Q: Can the Smart EV Charger be installed on a non-solar site behind a
dedicated 40A breaker?
A: Yes. Our standalone Smart EV Charger can be installed without solar
as well. However, when installed with solar the customer gets the added
benefits of charging on up to 100% solar energy and the solar-boost
mode feature.
Q: Does the Energy Hub come equipped with a cellular card?
A: Yes, it includes a cellular modem, with continuous reporting
capabilities.
Q: If installing multiple Energy Hub inverters, is there an extra RS485
port for creating leader/follower connections?
A: Yes. We added another RS485 port in the easily accessible interfaces
board within the connection unit/DCD.
Q: How many batteries can be connected to one Energy Hub inverter?
A: Currently, each Energy Hub inverter can support two batteries, so
that's 60kWh. When the SolarEdge battery is launched, each inverter will
support up to five SolarEdge batteries.
1
1
Pending firmware upgrade
Q: Do the CTs for the consumption meter work through the Backup
Interface or do they need to be run to each individual inverter?
A: CTs come installed in the Backup Interface, no need to run the wires
to the Energy Hub. If you aren’t using the Backup Interface, you’ll only
need to install CTs to activate consumption metering.