SE20KUS - SE40KUS Three Phase Inverters with SetApp configuration for the 277/480V Grid

Three Phase Inverters for the 277/480V Grid
(1)
for North America
(1) For 120/208V inverters refer to: https://www.solaredge.com/sites/default/les/se-three-phase-us-inverter-208V-setapp-datasheet.pdf
(2) For other regional settings please contact SolarEdge support
(3) Where permitted by local regulations
(4) For power de-rating information refer to: https://www.solaredge.com/sites/default/les/se-temperature-derating-note-na.pdf
MODEL NUMBER SE20KUS SE30KUS SE33.3KUS SE40KUS
APPLICABLE TO INVERTERS WITH PART NUMBER
SEXXK
-
USXXXBXXX
SEXXK
-
USX8IXXXX
OUTPUT
Rated AC Power Output 20000 30000 33300 40000 W
Maximum apparent AC output power 20000 30000 33300 40000 VA
AC Output Line Connections 4W + PE 3W + PE, 4W + PE
AC Output Voltage Minimum-Nominal-Maximum
(2)
(L-N) 244 - 277 - 305 Vac
AC Output Voltage Minimum-Nominal-Maximum
(2)
(L-L) 422.5 - 480 - 529 Vac
AC Frequency Min-Nom-Max
(2)
59.3 - 60 - 60.5 Hz
Maximum Continuous Output Current (per Phase) 24 36.25 40 48.25 Aac
GFDI Threshold 1 A
Utility Monitoring, Islanding Protection, Country Congurable Set Points Yes
Total Harmonic Distortion ≤ 3 %
Power Factor Range +/- 0.85 to 1
INPUT
Maximum DC Power (Module STC) 27000 45000 50000 60000 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage DC+ to DC- 1000 Vdc
Nominal Input Voltage DC+ to DC- 850 Vdc
Maximum Input Current 26.5 36.25 40 48.25 Adc
Maximum Input Short Circuit Current 33 55 Adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 1MΩ Sensitivity 167kΩ Sensitivity
(3)
CEC Weighted Efciency 98 98.5 %
Night-time Power Consumption <3 <4 W
ADDITIONAL FEATURES
Supported Communication Interfaces 2 x RS485, Ethernet, Cellular (optional)
Inverter Commissioning With the SetApp mobile application using built-in access point for local connection
Arc Fault Protection Integrated, User Congurable (According to UL1699B)
Rapid Shutdown NEC2014, NEC2017 and NEC2020 compliant/certied
RS485 Surge Protection Plug-in Supplied with the inverter, Built-in
DC Surge Protection
Type II, eld
replaceable, optional
Type II, eld replaceable, Built-in
AC Surge Protection - Type II, eld replaceable, Built-in
DC Fuses (Single Pole) - 25A, Built-in
Smart Energy Management Export Limitation
DC SAFETY SWITCH
DC Disconnect Integrated
STANDARD COMPLIANCE
Safety UL1741, UL1741 SA, UL1699B, CSA C22.2, Canadian AFCI according to T.I.L. M-07
Grid Connection Standards IEEE1547, Rule 21, Rule 14 (HI)
Emissions FCC part15 class A
INSTALLATION SPECIFICATIONS
AC output conduit size / AWG range
3/4” minimum /
12-6 AWG
¾” or 1” / 6 - 10 AWG
DC input conduit size / AWG range ¾” or 1” / 6 - 12 AWG
Number of DC inputs pairs 2 4
Dimensions with Safety Switch (H x W x D)
30.5 x 12.5 x 10.5 /
775 x 315 x 260
31.8 x 12.5 x 11.8 / 808 x 317 x 300 in / mm
Weight with Safety Switch 74.2 / 33.7 78.2 / 35.5 lb / kg
Cooling Fans (user replaceable)
Noise < 50 < 62 dBA
Operating Temperature Range -40 to +140 / -40 to +60
(4)
˚F / ˚C
Protection Rating NEMA 3R
Mounting Bracket provided
SE20KUS / SE30KUS / SE33.3KUS / SE40KUS
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are
trademarks of their respective owners. Date: 09/2020/V01/ENG NAM. Subject to change without notice.