Installation Manual

Mounting and Connecting the Primary and
Secondary Unit(s)
Theinverteristypicallymountedvertically,andtheinstructionsinthissectionare
applicableforverticalinstallation.SomeSolarEdgeinvertersmodelcanbeinstalled
horizontally(above10°tilt)aswellasvertically.Forinformationandinstructionsfor
horizontalmountingreferto
http://www.solaredge.com/sites/default/files/application_note_horizontal_mounting_
of_three_phase_inverters.pdf
FirstmountthePrimaryUnitthentheSecondaryUnit(s).
Figure 17: Mounting bracket
NOTE
Make sure the mounting surface or structure can support the weight of the inverter and brackets, and
make sure that it spans the width of the mounting brackets.
CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting techniques, and if required - a
lifting aid.
Objet lourd. Pour éviter la fatigue musculaire ou des blessures au dos, utilisez des techniques de levage
appropriées et, si nécessaire - un auxiliaire de levage lors du retrait.
1. Determinetheinvertermountinglocation,onawallorstudframing.Itisrecommendedtomount
theinverterinalocationprotectedfromdirectsunlight.
Three Phase Inverter with synergy technology Guide MAN-01-00401-1.1
27
Mounting and Connecting the Primary and Secondary Unit(s)