Installation Manual

Chapter 3: Installing the Primary and
Secondary Unit(s)
Installtheunitseitherbeforeorafterthemodulesandpoweroptimizershavebeeninstalled.
FirstinstallthePrimaryUnit,thentheSecondaryUnit(s)(inanyorder).
Primary Unit Package Contents
l PrimaryUnit(comprisedofaninverterandConnectionUnit)andpre-assembledcablesthatconnect
totheSecondaryUnit(s)
l Mountingbracketkit
l TwoAllenscrewsforfasteningtheunittothemountingbracket
l Installationguide
l Forbuilt-inwirelesscommunication:antennaandmountingbracket
l Level,formarkingthemountingbrackets'positions
l Cablelock(s)
Secondary Unit Package Contents
l SecondaryUnit
l Mountingbracketkit
l TwoAllenscrewsforfasteningtheunittothemountingbracket
Identifying the Units
ThestickersonthePrimaryUnitandontheConnectionUnitspecifytheinverter'sSerial Numberand
Electrical Ratings.
WhenopeningasiteintheSolarEdgemonitoringplatformandwhencontactingSolarEdgesupport,
providetheinverter'sserialnumber.
Primary Unit Interface
Figure 10: Primary Unit interface
l AC and DC conduit entries:ConnectionpointsoftheConnectionUnit.
l Two communication glands,forconnectionofcommunicationoptions.Eachglandhasthree
openings.RefertoSettingUpCommunicationonpage56formoreinformation.
Three Phase Inverter with synergy technology Guide MAN-01-00401-1.1
21
Chapter 3: Installing the Primary and Secondary Unit(s)