Installation Manual

About This Guide
CDMA Cellular Installation Guide - MAN-01-00194-1.3
4
About This Guide
This user guide is intended for Photovoltaic (PV) installers,
technicians, maintainers, and integrators who use the SolarEdge
power harvesting system.
This manual describes how to install and set up cellular CDMA
communication in a SolarEdge inverter.
SolarEdge offers this communication option for connection of the
SolarEdge inverter to the SolarEdge monitoring server.
This guide assumes that the SolarEdge power harvesting system is
already installed and commissioned. For additional information
about how to install and commission the SolarEdge power harvesting
system, refer to the SolarEdge Installation Guide.
The guide includes the following chapters:

Chapter 1: Software Compatibility Check and Upgrade, page 6,
describes how to check the inverter SW version and upgrade if
required.

Chapter 2: Installing the Cellular Modem and Antenna, page 6,
describes how to mount, connect and verify the connection of
the cellular modem and antenna.

Chapter 3: Configuring Cellular Communication, page 16,
describes how to set up the cellular communication option in
the inverter, and check the communication.

Appendix A: Technical Specifications, page 18, provides the
electrical and mechanical specifications of the SolarEdge
cellular modem.
For further information, datasheets and the most up-to-date
certifications for various products in different countries, please visit
the SolarEdge website: www.solaredge.com