Specifications

COMPATIBLE INVERTERS
SEXXXX
-
XXXXXBXX4
(
INVERTERS WITH SETAPP CONFIGURATION
)
UNITS
RF PERFORMANCE
Transmit Power (Max) 19.5 dBm
Receiver Sensitivity (802.11b @ 1Mbps DSS) -94 to -69 dBm
EIRP with Antenna 24.5 dBm
Outdoor (LOS) Range 400 / 1300 m / ft
Indoor Range
(1)
50 / 160 m / ft
Frequency Band 2412 - 2462 MHz
Bandwidth 20 MHz
Antenna Gain
(2)
5 dBi
NETWORK AND SECURITY
Channels 1-11
Security WPA-PSK, WPA2-PSK, WEP
WIRELESS LAN
Standards 802.11b/g/n
Modulation 802.11b - DSSS-CCK, 802.11g - OFDM, 802.11n - HT modulations, MCS0-7
Data Rates
1 - 72 Mbps
ENVIRONMENTAL
Operating Temperature -20 to +60 / -4 to +140 °C / °F
Storage Temperature -20 to +60 / -4 to +140 °C / °F
Relative Humidity (non-condensing) 0 - 80 %
Ingress Protection IP20
MECHANICAL
Dimensions (HxWxD; with pins) 66.3 x 48 x 63 / 2.6 x 1.8 x 2.5 mm / inch
Weight without Antenna 90 / 0.20 gr / lb
Weight with Antenna 110 / 0.24 gr / lb
POWER SUPPLY
AC Voltage (nominal) 100-240 Vac
AC Frequency (nominal) 50/60 Hz
Max Input Current 50 mA
STANDARD COMPLIANCE
Safety UL62368-1:2014 Ed.2; CSA-C22.2 No. 62368-1:2014 Ed.2
EMC CFR 47 FCC Part 15, Subpart B; Canada ICES-003, Issue 6; ANSI C63.10:2013
AC Plug NEMA 1-15P (two-pole, no ground)
Wireless Gateway and Repeater
(1) Approximate values, may dier depending on specic in󰎯allation conditions
(2) The antenna may have higher gain within EIRP power con󰎯raint
for North America
Model: WiFi-GW
SE-WFGW-B-S1-NA, SE-WFRPT-B-S1-NA