Installation

Accessing the Wireless Gateway Maintenance Web Page
The maintenance web page allows selecting a Wi-Fi channel, upgrading the device
firmware and checking the device parameters.
To access the web-page when the wireless device is in the Maintenance mode:
1. Press the push-button for more than 4 seconds. The wireless device attempts to
establish connection with a mobile device.
2. On your mobile device, access the list of Wi-Fi networks. The list will now contain
one or more access points, as follows:
For Wireless Gateway: SEDG-GW-MAINT[XXXX]
For Wireless Repeater: SEDG-RPTR-MAINT[XXXX]. XXXX are the last 4 MAC
characters on the label at the back of the device.
3. Select one of the above access points to view its parameters.
4.
When prompted, enter the IP address: 192.168.5.1 to view the Web page.
The following is a web page example of the Wireless Gateway Maintenance mode.
Wireless Gateway and Wireless Repeater Installation Guide MAN-01-00559-1.6
16 Chapter 4: Status, Errors and Troubleshooting