Installation

1. Prepare the inverter(s) and Wireless Gateway/Repeaters:
a.
Install the Wi-Fi antenna on the inverter(s), as described in the Antenna
Installation guide.
b. Open the SetApp application on your mobile device and go to the
Commissioning screen.
c. To configure the inverter(s) to connect to the monitoring
platform via Wi-Fi, select either Communication or Monitoring
Communication (depending on your SetApp version) and follow
on-screen instructions.
d. Connect the supplied antenna to the Wireless Gateway and Repeaters.
2.
Use SetApp to pair the Wireless Gateway (and Repeater if required) with the inverter:
a.
Select Communication è Wi-Fi. The Wi-Fi screen is displayed:
b.
Follow the instructions on the SetApp screen: Scan the QR codes, or enter the
SSID (format: SEDG-XXXXXXXX-YY) andpassword, printed on the label on the
back side of the device or on the first page of the quick installation guide.
The credentials are transmitted to the inverter.
c. On your mobile device, open the App Store or Google Play application and
update SetApp.
d. Wait for the message All Device(s) Scanned to appear on the SetApp screen.
e. Plug the Wireless Gateway to a power socket.
f.
Connect the Ethernet cable between the Wireless Gateway and the home router
used for Internet connection.
It is recommended to install the Wireless Gateway away from the home router at
the maximum possible distance.
g. Optionally, plug a Repeater into a power socket to extend the Wi-Fi range.
Locate the devices within the distances defined in the technical specifications
to ensure signal reception.
h.
Do one of the following:
To complete the installation now, select Continue Now. The inverter
attempts to establish a connection with the Wireless Gateway and the
monitoring platform. This may take up to 10 seconds, during which the
push-button LED will fast blink purple or blue (Repeater). Upon completion,
the LED will indicate the device status as described in LEDIndications on
page 9.
Chapter 3: Connection and Configuration 11
Wireless Gateway and Wireless Repeater Installation Guide MAN-01-00559-1.6