Installation Manual

2.
Short-presstheLCDlightbutton(inHD-Wavepresstheup/down
buttons)untilthefollowingscreenisdisplayed.
I D : # # # # # # # # # #
D S P 1 / 2 : x . x x x x / x . x x x x
C P U : 0 0 0 3 . 1 6 0 0
C o u n t r y : X X X X X
3.
ChecktheCPUversionnumber.Iflowerthan3.16xx,upgradethe
invertersoftwareasdescribedbelow;otherwiseclosetheinvertercover
andproceedwithconfiguration.
NOTE
Only inverters with version 3.xxxx can be upgraded.
To upgrade the inverter software:
1. DisconnecttheACpowertotheinverterandwait5minutes.
2. Opentheinvertercoverasdescribedinitsmanual.
3.
Insertthefirmwareupgradecardsuppliedwiththekitintothecard
slotonthecommunicationboard.
SolarEdge 1Ph/3Ph inverters SolarEdge 1Ph inverter (HD-Wave)
Figure 4: Communication board and activation card
Chapter 2: System Compatibility Check and Upgrade
GSM Installation Guide MAN-01-00248-1.1
7