Installation Manual

Chapter 2: System Compatibility
Check and Upgrade
Hardware Requirements
TousetheGSMcommunicationoption,thecommunicationboardmust
includeadesignatedmodemconnector,asshowninthefollowingfigure.If
required,replacethecommunicationboardusingthekitavailablefrom
SolarEdge.
SolarEdge1PH/3PHinverterSolarEdge1Phinverter(HD-Wave)
Figure 3: Communication board with GSM connector
Software Requirements
TousetheGSMcommunicationoption,thecommunicationboardfirmware
(CPU)versionmustbe3.16xxorhigher.TousetheSolarEdgedataplan,the
versionmustbe3.18xxorhigher.
TheGSMCellularkitpackageissuppliedwithanupgradecardwithafirmware
versionsupportingGSM.
To check the inverter CPU version:
1. Verifythattheinverterhasbeenactivatedusingtheactivationcard
suppliedwiththeinverter.
Chapter 2: System Compatibility Check and Upgrade
GSM Installation Guide MAN-01-00248-1.1
6