Installation Manual

c.
Selectthecommunicationmode.
NOTE
If you selected High BW, you can later change to Low BW. If
you selected Low BW, to change to High BW, contact
SolarEdge Support.
d.
Dooneofthefollowing:
l IfyouselectedHighBW,amessageisdisplayed:Significant
cost may be incurred. Proceed?.Ifyouselectyes,the
modemimmediatelyattemptstoestablishcommunicationwith
themonitoringserver.
l IfyouselectedLowBW,thefollowingisdisplayed:
A u t o A c t i v a t i o n
M a n u a l A c t i v a t i o n
SelectAuto Activation;Themodemautomaticallyinitiates
connectiontotheserver.
ThemessagesActivatingandthenActivation Completeare
displayedwhenselectingandenteringrequiredinformation.If
Unidentified #errorappears,refertoTroubleshootingonthefacing
page.
4. ExittheSetupmodebyselectingtheExitoptionineachsubmenuscreen,
orwaitfortheinvertertoautomaticallyexitSetupmodeifnobuttons
arepressedformorethantwominutes.
Chapter 4: Configuring GSM Communication
GSM Installation Guide MAN-01-00248-1.1
20