Install Manual
Table Of Contents
- Disclaimers
- Revision History
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- RISK OF FIRE AND ELECTRIC SHOCK PREVENTION IMPORTANT SAFETY INSTRUCTIONS
- Smart EV Charging Safety Instructions
- Chapter 1: Introduction to Smart EV Charger
- Chapter 2: Connectors and Interfaces
- Chapter 3: Configuring and Using Smart EV Charger with mySolarEdge
- Chapter 4: Charging Instructions
- Chapter 5: Professional Installer- Connecting the AC Directly to the Smart EV Charger
- Required Equipment
- Main Procedure
- Grid Connection Guidelines
- Setting the Circuit Breaker Ratings
- Supported AC Grids
- Removing the Smart EV Charger Covers
- Disconnecting the AC Plug
- Directly Connecting the AC Grid to the Smart EV Charger
- Connecting the Smart EV Charger to the Single phase inverter with HD-Wave tec...
- Closing the Smart EV Charger Covers
- Chapter 6: Professional Installer - Setting Up Communication
- Chapter 7: Processional Installer - Configuring and Using Smart EV Charger with SetApp
- Chapter 8: Errors and Troubleshooting
- Appendix A: Professional Installer - Connecting the Smart EV Charger to an Energy Meter
- Mechanical Specifications
- Technical Specifications - Smart EV Charger (North America)
- Support Contact Information
STANDARD COMPLIANCE
Emissions FCC Part 15 Class B
Safety
UL2594, UL2231-1, UL2231-2, NEC Article 625
compliant
EV Charger SAE J1772
INSTALLATION SPECIFICATIONS
AC Connection plug NEMA 6-50
EV Charger Connector SAE J1772-2009
EV Charger Dimensions
(H x W x D)
12 x 7.3 x 6 / 309 x 190 x 154 in / mm
EV Charger Cable Length 25 / 7.6 ft / m
EV Charger Cable Weight 12.5 / 5.7 lb / kg
EV Charger Cable
Operating Temperature
Range
-22 to +122 / -30 to +50 F / ˚C
Protection Rating
(connected to EV or with
dust cap)
NEMA 3R
Technical Specifications - Smart EV Charger (North America) 54
Smart EV Charger Installation MAN-01-00657-1.0