Install Manual

Error code Displayed Error message Description and Troubleshooting
Press the Charge Now push
button on the Smart EV Charger ,
see Figure 2
-or-
Tap Charge Now on the Smart EV
Charger tab of the Monitoring
App
1Cx4; 1Cx5;
1Cx12 -1Cx13
Internal Error
Disconnect from EV
Internal error.
Disconnect the Smart EVCharger
cable from the vehicle.
Turn the inverter ACcircuit
breaker OFF and ON.
Reconnect the Smart EVCharger
Cable to the vehicle.
If the EV Charger is powered by
the inverter, then turn the inverter
AC circuit breaker OFF and ON.
If the EV Charger is standalone,
then turn the EV Charger AC
circuit OFF and ON.
1CxB/D; 1Cx10 -
1Cx11
Interface Error (Pilot) Press
Charge Now
Press the Charge Now push
button on the Smart EV Charger,
see Figure 2
-or-
Tap Charge Now on the Smart
EVCharger tab of the Monitoring
App
1Cx6
Ground Disconnected
Disconnect from EV
Ground Disconnected.
Disconnect the Smart EVCharger
cable from the vehicle.
Contact SolarEdge Support.
1Cx7 Over Temperature
Smart EVCharger over temperature
Smart EV Charger Installation MAN-01-00657-1.0
47 Chapter 8: Errors and Troubleshooting