Install Manual

Chapter 7: Processional Installer - Configuring
and Using Smart EV Charger with SetApp
After installing the Smart EV Charger configure it, then enable charging and other
advanced features (e.g. scheduling, excess solar charging) with SetApp.
You can connect communication options at this stage, as described in Professional
Installer - Setting Up Communication on page 36.
You can download the SetApp from the Apple App Store and Google Play prior to
reaching the site.


Internet connection is required for the download and for the one-time registration,
however not required for using the SetApp.
Configuring the Smart EV Charger
1. Download and Follow the on- screen instructions to configure and use SetApp with
Smart EV Charger.
Configuring Communication Options
Communication settings can be configured only after communication connections are
complete. Refer to Professional Installer - Setting Up Communication on page 36.
To configure communication options:
1.
Tap the Communication menu to define and configure the following:
The communication option used by the Smart EV Charger to communicate with
the monitoring platform.
The communication option used to communicate between multiple SolarEdge
devices.
2.
Tap the Server red arrow to set the communication method to be used for
Chapter 7: Processional Installer - Configuring and Using Smart EV Charger
with SetApp 44
Smart EV Charger Installation MAN-01-00657-1.0