Install Manual
Table Of Contents
- Disclaimers
- Revision History
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- RISK OF FIRE AND ELECTRIC SHOCK PREVENTION IMPORTANT SAFETY INSTRUCTIONS
- Smart EV Charging Safety Instructions
- Chapter 1: Introduction to Smart EV Charger
- Chapter 2: Connectors and Interfaces
- Chapter 3: Configuring and Using Smart EV Charger with mySolarEdge
- Chapter 4: Charging Instructions
- Chapter 5: Professional Installer- Connecting the AC Directly to the Smart EV Charger
- Required Equipment
- Main Procedure
- Grid Connection Guidelines
- Setting the Circuit Breaker Ratings
- Supported AC Grids
- Removing the Smart EV Charger Covers
- Disconnecting the AC Plug
- Directly Connecting the AC Grid to the Smart EV Charger
- Connecting the Smart EV Charger to the Single phase inverter with HD-Wave tec...
- Closing the Smart EV Charger Covers
- Chapter 6: Professional Installer - Setting Up Communication
- Chapter 7: Processional Installer - Configuring and Using Smart EV Charger with SetApp
- Chapter 8: Errors and Troubleshooting
- Appendix A: Professional Installer - Connecting the Smart EV Charger to an Energy Meter
- Mechanical Specifications
- Technical Specifications - Smart EV Charger (North America)
- Support Contact Information
Chapter 4: Charging Instructions
1. Verify that the green LED ring is ON indicating that the Smart EV Charger is ON and
ready to charge.
2. Hold the Smart EV Charger plug and unwind the cable from the holder.
3.
Connect the Smart EV Charger plug to the charging socket of the vehicle and push
firmly until it clicks into the socket. The Smart EV Charger will sound 1 short beep
and the green LED will change from breathing to blinking indicating a proper
connection.
The charging starts automatically, indicated by 2 short beeps and 1 long beep while
the green LED is steadily on.
When the charging is complete, the green LED starts blinking.
4. Press the Smart EV Charger plug latch and pull it from the vehicle's EV charging
socket.
5. Wind the Smart EV Charger cable around the device and put the plug back in the
holder.
Smart EV Charger Installation MAN-01-00657-1.0
21 Chapter 4: Charging Instructions