Install Manual
Table Of Contents
- Disclaimers
- Revision History
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- RISK OF FIRE AND ELECTRIC SHOCK PREVENTION IMPORTANT SAFETY INSTRUCTIONS
- Smart EV Charging Safety Instructions
- Chapter 1: Introduction to Smart EV Charger
- Chapter 2: Connectors and Interfaces
- Chapter 3: Configuring and Using Smart EV Charger with mySolarEdge
- Chapter 4: Charging Instructions
- Chapter 5: Professional Installer- Connecting the AC Directly to the Smart EV Charger
- Required Equipment
- Main Procedure
- Grid Connection Guidelines
- Setting the Circuit Breaker Ratings
- Supported AC Grids
- Removing the Smart EV Charger Covers
- Disconnecting the AC Plug
- Directly Connecting the AC Grid to the Smart EV Charger
- Connecting the Smart EV Charger to the Single phase inverter with HD-Wave tec...
- Closing the Smart EV Charger Covers
- Chapter 6: Professional Installer - Setting Up Communication
- Chapter 7: Processional Installer - Configuring and Using Smart EV Charger with SetApp
- Chapter 8: Errors and Troubleshooting
- Appendix A: Professional Installer - Connecting the Smart EV Charger to an Energy Meter
- Mechanical Specifications
- Technical Specifications - Smart EV Charger (North America)
- Support Contact Information
Chapter 3: Configuring and Using Smart EV
Charger with mySolarEdge
After installing the Smart EV Charger configure it, then enable charging and other
advanced features (e.g. scheduling, excess solar charging) with mySolarEdge.
Using mySolarEdge
The following procedure describes the main actions required for using mySolarEdge to
configure and use the Smart EV Charger. You can download the app from the Apple
App Store or from Google Play, then click mySolarEdge icon.
To sign up to mySolarEdge:
1. Tap Sign up then follow the on- screen instructions until you get to the Scan the
QRBarcode screen.
2. Scan the QR barcode on the silver sticker located on the side of the device.
To configure and use mySolarEdge:
1. Login using your credentials.
2. Press the Smart EV Charger pushbutton (
Figure 2
) for 5 seconds to establish a local
Wi-Fi connection.
3. Connect to the Smart EV Charger using the Connecting to Wi-Fi screen.
4. Once successfully connected return to mySolarEdge Welcome screen.
5. On the Welcome screen tap EV Charger, then tap the car icon to access the Smart EV
Charger configuration screens.
6. Follow the on-screen instructions to configure and use mySolarEdge with Smart EV
Charger.
Chapter 3: Configuring and Using Smart EV Charger with mySolarEdge 20
Smart EV Charger Installation MAN-01-00657-1.0