Install Manual
Table Of Contents
- Disclaimers
- Revision History
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- RISK OF FIRE AND ELECTRIC SHOCK PREVENTION IMPORTANT SAFETY INSTRUCTIONS
- Smart EV Charging Safety Instructions
- Chapter 1: Introduction to Smart EV Charger
- Chapter 2: Connectors and Interfaces
- Chapter 3: Configuring and Using Smart EV Charger with mySolarEdge
- Chapter 4: Charging Instructions
- Chapter 5: Professional Installer- Connecting the AC Directly to the Smart EV Charger
- Required Equipment
- Main Procedure
- Grid Connection Guidelines
- Setting the Circuit Breaker Ratings
- Supported AC Grids
- Removing the Smart EV Charger Covers
- Disconnecting the AC Plug
- Directly Connecting the AC Grid to the Smart EV Charger
- Connecting the Smart EV Charger to the Single phase inverter with HD-Wave tec...
- Closing the Smart EV Charger Covers
- Chapter 6: Professional Installer - Setting Up Communication
- Chapter 7: Processional Installer - Configuring and Using Smart EV Charger with SetApp
- Chapter 8: Errors and Troubleshooting
- Appendix A: Professional Installer - Connecting the Smart EV Charger to an Energy Meter
- Mechanical Specifications
- Technical Specifications - Smart EV Charger (North America)
- Support Contact Information
Chapter 2: Connectors and Interfaces
Figure 2: Smart EV Charger connectors and interfaces
Smart EV Charger cable connector: Used for connecting the cable to the Smart EV
Charger
AC plug :Used for plugging the Smart EVCharger into the wall socket
Smart EV Charger push button: Pressing the button has the following functionality:
Press Description
Short press
In case of malfunction restarts the Smart EV Charger.
In case the Smart EV Charger is on scheduling mode press to
immediately start charging.
Long press Turn on the Wi-Fi
Communication gland - for professional installer:
For connection of Smart EV Charger communication options, refer to
Professional
Installer - Setting Up Communication
on page 36 for more information.
Smart EV Charger Installation MAN-01-00657-1.0
15 Chapter 2: Connectors and Interfaces