Site Manager Manual

26
SolarEdge Site Designer V2.3
Figure 17 – De-rating factors
1 Module Factors: edit the de-rating factors associated with module
energy losses: PV nameplate, Module Soiling and Module Aging.
There are no Mismatch losses in the SolarEdge system.
2 Electrical Factors: edit the de-rating factors associated with electrical
components in the system: DC wiring, AC wiring, and Diodes and
Connections. Inverter and power optimizer losses are system
dependent and are calculated according to the models used in the
design.
3 Location Factors: edit the de-rating factors associated with the specific
system location: System Availability and Shading.
4 Save a set of values as the default values with the Set as Default icon.
You can choose your default values by pressing the Restore Default
icon, and you can return to the SolarEdge settings by pressing the
Restore SolarEdge Default icon.