Site Manager Manual

18
SolarEdge Site Designer V2.3
View Project Summary
In the Summary screen you can see an overview of the selected design, as
detailed below and shown in Figure 11.
Figure 11 – Summary
1 Project summary: STC power, max DC power at given location and
orientation, inverter active AC power and inverter apparent AC power.
2 Yearly energy: estimated yearly energy that the system will produce.
3 Project design: inverter, power optimizer and module quantity;
number of PV arrays defined; number of different orientations used;
phase balancing requirement.
4 Environmental data: the system’s environmental impact according to its
estimated energy.
5 Estimated monthly energy: graph displaying the estimated monthly
energy that the system will produce.
a. If the inverter is strongly over-sized and as a result there AC
energy is lost due to output power clipping, the monthly and
yearly values of energy lost due to clipping are displayed as
well, as a percentage of produced energy.
b. Check that if a yield factor appears, it is at a satisfactory value.
The yield factor indicates low energy production in multi-facet
installations due to low number of modules on a facet.