Site Manager Manual

15
SolarEdge Site Designer
Get Recommended Designs
In the Get Design screen the Site Designer recommends one or several
system designs, as shown in Figure 9, based on the location and PV array
data that you input at the previous stages.
Figure 9 – Get Design
1 Review different recommendations in this area.
In some complex mutli-orientation designs the application may not offer
any recommendation. In this case you can change the system settings as
described below or manually design the installation by pressing Edit
Design.
Changing the system settings:
2 Restrict the recommendation to specific Optimizer configurations that
should be used in the design: specific power optimizer models and
specific number of modules connected to each power optimizer.
3 Restrict the recommendation to specific inverter models that should be
used in the design.