Site Manager Manual

12
SolarEdge Site Designer V2.3
Define Modules and Orientations
In the Define PV Arrays screen you select a module model and define the
system sizing and related settings, as detailed below and shown in Figure 7.
Figure 7 – Define PV Arrays
You must fill in the following mandatory fields:
1 Select a module Manufacturer and Model
You can manage the modules:
2 Save a module as the default module with the Set as Default icon. You
can remove this selection at any time with the Clear Default icon. You
can choose your default module by pressing the Restore Default icon.
3 Mark a module as favorite using the Add to Favorites icon. You can
remove a module from the favorite list at any time be pressing the
Remove from Favorites icon.
4 Check the Favorites only box to see only modules saved as favorites.
5 Check the Only modules optimized by SolarEdge box to see only
modules with embedded power optimizers.
6 Define the System size, either according to number of modules or to
system size in kWp (STC).
7 Adjust the modules’ Orientation.