Site Manager Manual

11
SolarEdge Site Designer
You also have the option of changing the following fields:
8 Enter a project Name and Description; if you generate a report, these
fields will appear in the report.
9 Adjust the Ambient Temperature range to which the system will be
subjected.
10 If the desired location is not available, you can add a location by
pressing the Add icon . You can later edit or delete this location
using the corresponding icons (these icons appear only when using a
location you added).
11 Select an electrical grid to ensure designs with inverters that comply
with the required grid.
12 Adjust the phase imbalance limit which is the maximum phase
imbalance permitted between phases. For single-phase inverter
installations connected to the three-phase grid the application will not
allow higher phase imbalance.
13 Adjust the inverter power factor. This field is available only in
countries with reactive power requirements.
After entering all the information:
14 Press Next.