P730 Power Optimizer Specifications
Power Optimizer For North America
P730 / P850 / P800p
Optimizer Model
(Typical Module Compatibility)
P730
(for 2 x high power 72-cell PV
modules)
P850*
(for 2x high power or bi-facial
modules)
P800p
(for 2x 96-cell 5’’ PV modules)
INPUT
Rated Input DC Power
(1)
730 850 800 W
Connection type Single input for series connected modules
Dual input for independently connected
modules
Absolute Maximum Input Voltage
(Voc at lowe temperature)
125 120 83 Vdc
MPPT Operating Range 12.5 - 105 12.5 - 83 Vdc
Maximum Short Circuit Current (Isc) 11 12.5 14 Adc
Maximum Short Circuit Current per input (Isc) N/A 7 Adc
Maximum DC Input Current 13.75 15.63 17.5 Adc
Maximum DC Input Current per input N/A 8.75 Adc
Maximum Eciency 99.5 %
Weighted Eciency 98.6 %
Overvoltage Category II
OUTPUT DURING OPERATION
(
POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current 15 18 Adc
Maximum Output Voltage 85 Vdc
OUTPUT DURING STANDBY (
POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF
)
Safety Output Voltage per Power Optimizer 1 ± 0.1 Vdc
STANDARD COMPLIANCE
Photovoltaic Rapid Shutdown Syem Compliant with NEC 2014, 2017
(2)
EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety IEC62109-1 (class II safety), UL1741
Material UL94 V-0, UV Resiant
RoHS Yes
INSTALLATION SPECIFICATIONS
Compatible SolarEdge Inverters Three phase inverters
Maximum Allowed Syem Voltage 1000 Vdc
Dimensions (W x L x H) 129 x 153 x 49.5 / 5.1 x 6 x 1.9 129 x 162 x 59 / 5.1 x 6.4 x 2.3 129 x 168 x 59 / 5.1 x 6.6 x 2.3 mm / in
Weight (including cables) 1064 / 2.34 1090 / 2.4 1064 / 2.34 gr / lb
Input Connector
(3)
MC4 MC4 Dual Input
(4)
Output Wire Type / Connector Double Insulated; MC4
Output Wire Length 2.1 / 6.9 1.8 / 5 2.1 / 6 m / ft
Operating Temperature Range
(5)
-40 - +85 / -40 - +185 ˚C / ˚F
Protection Rating IP68 / NEMA6P
Relative Humidity 0 - 100 %
(1)
Rated power of the module at STC will not exceed the optimizer “Rated Input DC Power”. Modules with up to +5% power tolerance are allowed.
(2)
NEC 2017 requires max combined input voltage be not more than 80V.
(3)
For other connector types please refer to: https://www.solaredge.com/sites/default/les/optimizer-input-connector-compatibility.pdf.
(4)
In a case of odd number of PV modules in one ring it is allowed to inall one P730/P800p/P850 power optimizer connected to one PV module. When connecting a single module to
the P800p seal the unused input connectors with the supplied pair of seals.
(5)
For ambient temperature above +70˚C / +158˚F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Application Note for more details.
PV Syem Design Using a Solaredge Inverter
(6)
Three Phase 208V Three Phase 480V
Compatible Power Optimizers P730
(7)
P800p, P850
(7)
P730 P800p, P850
Minimum String Length
Power Optimizers 8 13
PV Modules 16 26
Maximum String Length
Power Optimizers 30 30
PV Modules 60 60
Maximum Power per String 6000
(8)
7200 12750
(9)
15300 W
Parallel Strings of Dierent Lengths or Orientations Ye s
(6)
P800p and P850 can be mixed in the same ring. It is not allowed to mix P730 with P800p/P850 in one ring or to mix P730/P800p/P850 with P300/P320/P400/P405 in one ring.
(7)
P730/ P800p/ P850 design with three phase 208V inverters is limited. Use the SolarEdge Designer for verication.
(8)
For SE14.4KUS/SE43.2KUS: It is allowed to inall up to 6,500W per ring when 3 rings are connected to the inverter (3 rings per unit for SE43.2KUS) and when the maximum power dierence between the
rings is up to 1,000W.
(9)
For SE30KUS/SE33.3KUS/SE66.6KUS/SE100KUS: It is allowed to inall up to 15,000W per ring when 3 rings are connected to the inverter (3 rings per unit for SE66.6KUS/SE100KUS) and when the
maximum power dierence between the rings is up to 2,000W.
* P850 replaced the P800s; they can be used interchangeably and can be connected in the same ring.
© SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or regiered trademarks of SolarEdge Technologies, Ltd.
All other trademarks mentioned herein are trademarks of their respective owners. Date: 02/2018/V01/ENG NA. Subject to change without notice.