P400 Installation

l CommunicationèServerèLAN,ZigBee, orCDMA
l RS485-1Conf.è DeviceTypeèSolarEdge
l RS485-1Conf.èProtocolèMaster
l RS485-1Conf.èSlave Detect
ThesystemstartsautomaticdetectionoftheSolarEdgeslaveinvertersconnectedto
themasterinverter.Theinvertershouldreportthecorrectnumberofslaves.Ifitdoes
not,verifytheconnectionsandterminations.
5. VerifytheconnectionofthemastertotheSolarEdgemonitoringportal,asdescribedin
Verifying the Connectiononpage82.
Creating a Wireless ZigBee Connection
ThiscommunicationoptionenablesusingaZigBeeconnectiontoconnectoneorseveral
devicestotheSolarEdgemonitoringportal.
TheZigBeedeviceisprovidedwithausermanual,whichshouldbereviewedpriorto
connection.ItisavailableontheSolarEdgewebsiteat
http://www.solaredge.us/groups/products/communication(underZigBee).
Creating a Cellular Connection
ThiscommunicationoptionenablesusingacellularCDMAconnectionforconnectingthe
devicetotheSolarEdgemonitoringportal.
Thecellularkitcanbepurchasedseparatelyandassembledduringsysteminstallation.Thekit
isprovidedwithausermanual,whichshouldbereviewedpriortoconnection.Itisavailable
ontheSolarEdgewebsiteathttp://www.solaredge.us/groups/products/communication
(underCellular).
Chapter 7: Setting Up Communication
SolarEdge-Installation Guide MAN-01-00002-4.0
81