P400 Installation


o
LOCAL-Thepoweriscontrolledlocally(e.g.byafixedlimit),orthisinverter
limitsthePVpowerproductiontoitsrelativeportionofthefeed-inpowerlimit,
asaresultofdisconnectedcommunicationwiththesmartenergymanager.If
thisstatusappears,checkthecommunicationtothesmartenergymanageror
thecommunicationtothemeter.
l PWR Limit:Theinvertermaximumoutputpowersetbyoneofthepowerlimiting
options:

o
RRCR

o
Smartenergymanager(Feed-inlimitation)

o
P(f)

o
Q(U)
l Cos Phi:Theratiobetweenactivetoreactivepower
l Power Prod:Thepowerproducedbytheinverter
Formoreinformation,refertothefollowingapplicationnotes:

o
Power Control Application Note,availableontheSolarEdgewebsiteat
http://www.solaredge.us/files/pdfs/application_note_power_control_
configuration.pdf

o
Feed-in Limitation Application Note,availableontheSolarEdgewebsiteat
http://www.solaredge.us/files/pdfs/products/feed-in_limitation_application_note.pdf

SolarEdge-Installation Guide MAN-01-00002-4.0
70
Power Control Status